Watchmaker’s Lathe Die Filer Attachment Levin, Boley,  “exceptionally Rare

CLICK HERE TO BUY!

Watchmaker’s Lathe Die Filer Attachment Levin, Boley,  “exceptionally Rare

I have only seen one or two of these Die Filing attachments in the last 25 years. This one is a real piece of machining art. It works by mounting it to the bed of a watchmakers lathe and securing the eccentric crank arbor into the headstock of the… full details here

Daewoo Puma 8 Cnc Lathe

CLICK HERE TO BUY!

Daewoo Puma 8 Cnc Lathe

Daewoo Puma 8 CNC Lathe, Fanuc 11TA control, under power, was running good parts. Turret recently rebuilt, lift up chip conveyor. All manuals including programming, parts list, electrical included. All available turret block holders included, 8″ chuck and available jaws. Original owner, not a dealer.

Loading and shipping not included but… full details here

Republic Lagun Ftv 2 Anilam 3 Axis Milling Machine With Tooling South Bend Lathe

CLICK HERE TO BUY!

Republic Lagun Ftv 2 Anilam 3 Axis Milling Machine With Tooling South Bend Lathe

REPUBLIC LAGUN FTV-2, 10X50 TABLE, VARIABLE SPEED, HARDENED WAYS, 3 AXIS ANILAM 1100
CONTROL, 3 PH POWER, SELF OILING, COOLANT PUMP, COMES WITH SOME TOOLING
AND A MANUAL, PLEASE SEE PHOTOS, EXCELLENT CONDITION, RUNS GREAT, READY TO MAKE YOU $$$, COME
CHECK IT OUT, LOCAL PICK-UP ONLY, CALL
MR SMITH… full details here

Watchmaker’s Lathe Die Filer Attachment Levin, Boley,  “exceptionally Rare

CLICK HERE TO BUY!

Watchmaker’s Lathe Die Filer Attachment Levin, Boley,  “exceptionally Rare

I have only seen one or two of these Die Filing attachments in the last 25 years. This one is a real piece of machining art. It works by mounting it to the bed of a watchmakers lathe and securing the eccentric crank arbor into the headstock of the… full details here

Wasino Leo 125a Engine Lathe (used) 19 X 50

CLICK HERE TO BUY!

Wasino Leo 125a Engine Lathe (used) 19 X 50

WASINO LEO-125A ENGINE LATHE (USED)19″ X 50″

D1-6″ CAMLOCK NOSE.

19 TO 1500 RPM.

SPINDLE BORE 2 1/8 IN.

NO INTERNATIONAL SALE.

PAY BY PAYPAL ONLY WITH IN 72 HOURS OF SALE.

WE WILL PACKAGE AND SHIP WITH IN THREE WORKING DAYS AFTER PAYMENT.

CONTACT SELLER FOR SHIPPING INSTRUCTIONS.

WITH 12″ 4 JAW CHUCK, QUICK CHANGE TOOL POST… full details here

Leblond Regal Engine Lathe

CLICK HERE TO BUY!

Leblond Regal Engine Lathe

This lathe appears to be in good order. I owned for 1 1/2 years and had very good performance with this machine. When I first got this I replaced oil and looked over gears and they looked new. This is a good American heavy duty lathe. Voltage is 240,  3… full details here

19x84 Leblond Servoshift Lathe Late Model With 3 Spindle Bore

CLICK HERE TO BUY!

19x84 Leblond Servoshift Lathe Late Model With 3 Spindle Bore

Free shipping to the Midwest region of the USA.This machine is near perfect condition.  It was very lightly used.  It is a 19×84 Leblond servo shift model 19-E7 with a 3 inch spindle hole.Included attachments are as follows:-Aloris tool post with 2 holders-2 live centers-10-1/2 Jacobs drill chuck-Jacobs rubber flex… full details here

19 X 150 Leblond Regal Engine Lathe Inch Metric Dro Aloris Tooling Buck Chuck

CLICK HERE TO BUY!

19 X 150 Leblond Regal Engine Lathe Inch Metric Dro Aloris Tooling Buck Chuck

19 x 150 Leblond Regal Engine LatheInch/metric threading4 steady rests! Steady rests are easily 1000.00 and up each USED!Aloris tool post and a lot of BRAND NEW tool holders. Over 3500.00 in toolholders and postDRO on Z (long) axisTaper AttachementTailstock center, drill chuck various morse taper sleeves.I have been in… full details here

1982 3ne 300 Hitachi Seiki Lathe

CLICK HERE TO BUY!

1982 hitachi seiki lathe machine. Powers up but we don’t use it. Bought a new machine..must go!!!! As is no warrantyShipping is not included. Will need to be organized as freight or can be picked up.

Posted with eBay Mobile… full details here

Ikegai Fx 25 Cnc Lathe 6 Position Well Tooled With Bar Feed

CLICK HERE TO BUY!

Ikegai Fx 25 Cnc Lathe 6 Position Well Tooled With Bar Feed

IKEGAI FX 25, has a 10 inch chuck & 5C collet closer

Here are pictures of the tools it comes with: http://imgur.com/a/TBvRR

Also comes with a hydro bar feed: http://imgur.com/a/NYqNF
The hydro bar feed comes equipped with guide and feed tubes. ~12 feet long

Can be seen under power in North Hollywood, E… full details here

2007 Clausing  Cv 1660  Gap Bed Lathe 4 Thru Hole,accu rite 2 Axis Dro

CLICK HERE TO BUY!

2007 Clausing  Cv 1660  Gap Bed Lathe 4 Thru Hole,accu rite 2 Axis Dro

2007 CLAUSING  CV 1660  Gap Bed Lathe

  (model: CDS 62 40C)

THIS MACHINE IS IN EXCELLLENT CONDITION!!

MACHINE SPECS:

  • 4″   SPINDLE BORE     
  • 12″ 3-JAW CHUCK
  • 60″ BETWEEN CENTERS
  • 16″ SWING
  • 25-1700 R.P.M’s
  • ACU~RITE  2-AXIS  D.R.O.
  • 4 tool holders included

Questions: Please call Mike @ 866-803-5202

 … full details here

1995 Mazak Qt 15n Cnc Lathe T plus Control

CLICK HERE TO BUY!

1995 Mazak Qt 15n Cnc Lathe T plus Control

                   1995 Mazak QT-15N CNC Lathe                                   
                  1995 Mazak QT-15N CNC Lathe                                                    RTM Part Number: M1995A

                1995 Mazak QT-15N CNC Lathe

Swing x Length
12 X 20

Spindle Speed
4000

Spindle Bore
2

Spindle Motor
20

Chip conveyor
No

Weight
9500

Electrical
3 phase 208-480

Floor Space

Equipped With:

Equipped with
Maztrol T-Plus
12″ SMW bar Feeder
Parts Catcher
Tool eye
8 postion Turret
Coolant tank
Tail Stock programable
Machine… full details here

Logan 11x24 Metal Lathe 1935 2 Variable Speed Vfd Single Phase

CLICK HERE TO BUY!

Logan 11x24 Metal Lathe 1935 2 Variable Speed Vfd Single Phase

Logan 11×24 Metal Lathe, Model # 1935-2. Excellent condition throughout. Recently repowered w/ new Baldor 1.5hp motor and VFD running on single phase 240V. Electronic speed control. Includes Import (piston style) AXA quick change toolpost w/ multiple holders (no carbide or HSS tooling included). 3 jaw and 4 jaw Logan… full details here

Gap Bed Lathe

CLICK HERE TO BUY!

Gap Bed Lathe

Heavy duty lathe 53″ gap 24″ steady rest 12″ steady rest @ 120″ centers 3 1/2″ tru hole Just removed from service. The lathe weight @ 30000# Will load… full details here

Leblond Regal 19 X 15 Servo Shift Engine Lathe Inch Metric Dro

CLICK HERE TO BUY!

Leblond Regal 19 X 15 Servo Shift Engine Lathe Inch Metric Dro

19 x 150 Leblond Regal Engine LatheInch/metric threading4 steady rests! Steady rests are easily 1000.00 and up each USED!Aloris tool post and a lot of BRAND NEW tool holders. Over 3500.00 in toolholders and postDRO on Z (long) axisTaper AttachementTailstock center, drill chuck various morse taper sleeves.I have been in… full details here

Ikegai Fx 25 Cnc Lathe 6 Position  Well Tooled

CLICK HERE TO BUY!

Ikegai Fx 25 Cnc Lathe 6 Position  Well Tooled

IKEGAI FX 25, Three machines available, 1 has a 10 inch chuck & 5C collet closer
1 has a 10 inch chuck & S30 collet holder
1 has 5c & S30 collet holder Hardinge
price is for each mahcine

;Can be seen under power in North Hollywood, CAYou must pick… full details here

Omniturn Gt 75 1 1/8 Capacity

CLICK HERE TO BUY!

Omniturn Gt 75 1 1/8 Capacity

CNC horizontal Lathe, runs great. low hours, replaced spindle collet closer with a Dunham bought from manufacturer (not much use since then), new video tube, new motherboard, new spindle inverter; Includes 6′ Bar Feed and tool holders; I’m the original owner and have the manual from the original purchase.Can be… full details here

Engine Lathe

CLICK HERE TO BUY!

Engine Lathe

 This “AMERICAN ” lathe is an 18″ swing with about 36 inch between centers and a 2 inch spindle bore. Comes with a tool post as seen in pictures and coolant system. Tail stock is #4 MT and has a 10 inch 3 jaw chuck. This machine has a top… full details here

Gap Bed Lathe

CLICK HERE TO BUY!

Gap Bed Lathe

Heavy duty lathe 53″ gap 24″ steady rest 12″ steady rest @ 120″ centers 3 1/2″ tru hole Just removed from service. The lathe weight @ 30000# Will load… full details here

1995 Mazak Qt 15n Cnc Lathe T plus Control

CLICK HERE TO BUY!

1995 Mazak Qt 15n Cnc Lathe T plus Control

                   1995 Mazak QT-15N CNC Lathe                                   
                  1995 Mazak QT-15N CNC Lathe                                                    RTM Part Number: M1995A

                1995 Mazak QT-15N CNC Lathe

Swing x Length
12 X 20

Spindle Speed
4000

Spindle Bore
2

Spindle Motor
20

Chip conveyor
No

Weight
9500

Electrical
3 phase 208-480

Floor Space

Equipped With:

Equipped with
Maztrol T-Plus
12″ SMW bar Feeder
Parts Catcher
Tool eye
8 postion Turret
Coolant tank
Tail Stock programable
Machine… full details here

 Page 6 of 162  « First  ... « 4  5  6  7  8 » ...  Last »